*REVIEW* Saige's Hot Air Balloon - Boy Camp #LADLCamp2019

Brightly colored balloon. Round dark gray plastic base that snaps into frame on top of basket. Lighter gray “burner” centered on base. Envelope portion is made of four-sided panels of material, with amber at the base, followed by a narrow stripe of fuschia, a wider stripe of royal blue, a narrow stripe of orchid purple, culminating in aqua blue at the top. Four stylized cactus flowers (Saige’s emblem) printed on balloon in fuschia--two in aqua top portion, two in amber bottom portion. Balloon inflates by means of a blow valve similar to those found on standard beach balls.

Tan plastic basket molded to resemble woven wicker. Dark gray plastic frame on top for balloon base to snap into; there is enough room for two dolls to fit beneath the balloon standing upright in the basket. Two sides of basket have a slight downward curve in the upper edge, other sides are straight. Hinged door on one straight side of basket for ease of access. Golden orange trim around upper edge of basket and door. Two red accents at each outside corner of basket. Two rows of cream rope woven through holes in basket plastic; one just below upper trim and one just above base. These ropes continue across the door panel. Lower rope forms two loops at each curved side. Black square details along sides of basket. 

 

 

*DOLL PARTY SERIES* Saige's Hot Air Balloon Party!

Saige's birthday is October 8!

Decorate in a southwestern theme. Serve pork and beans and a hot air balloon cake.

  Invites:

 Party Favors:
Fill My Life As.... plastic cowboy boots with candy for party favors. Give each guest a My Life As....cowboy hat for their doll to wear.

Party Crafts:

Craftsncoffee

Make adorable hot air balloons out of old ornaments or use styrofoam balls! 

3D hot air balloons! 

 Decorate your party room with these adorable easy to make hot air balloons! Use up left over scrapbook paper. They also make great party favors for guests to take home. ENJOY!

Make Saige's CASA for photo prop. Don't forget to bring out all of your horses for dolls to pose with in photos.
Make a doll size hot air balloon for photo props!  

How To Make- Saige's Hot Air Balloon

After getting Saige's Starter Collection for my birthday, I really wanted to try and re-create her hot air balloon! Why? Because it is so amazing. And because it's out of my doll budget at $150, but that's OK because I made this one!

For me, there was one of two ways that I could do this. And I wanted two options so others can try to create their own according to their age and skill level. This tutorial has both the FOAM BOARD version and the 3D Balloon version.

The foam board hot air balloon is just that, made from basic foam board. Draw with pencil a large sized light bulb shape; you may need to mark for measurements so it is not lopsided. Cut it out and either #1 - paint the rainbow stripes or #2 - glue on rainbow stripes from colored poster board.

TIP: Use an AG catalog for reference.

You can use either a basket or a box for Saige to stand in. 

If using a box you may want to either paint it or cover it at this point. I glued on burlap print scrapbook paper for a textured look. 

Now attach the foam board balloon to the basket with hot glue using cardboard strips for reinforcement as needed. Attach it at the back so Saige can fit inside the basket from the front side.
 

I have colored in the balloon via photo shop so you can see how colorful it would look!!!

For the 3D version

Using a basket or a box -make sure it is tall enough - waist high- so that Saige won't fall out. 

Cut plastic curtain rods with heavy duty snips then cover in duct tape.

 

Attach to the corners with hot glue then reinforce each with cardboard strips on the inside corners.
 

You will need to add a piece of cardboard to the top of the posts to act as a canopy. This is where your balloon base will rest.

Cut four sheets of poster board vertically in half then meet all four at one end and hot glue them together. 

Add a round piece of cardboard to cover the area where they join; hot glue foam cups to act as a center support then glue it to the circle board cut out. Now staple the sides together with three staples.

 When the balloon is upright it should look like this.
Attach the pillar of cups (inside the balloon) onto the top of the canopy (that's over the basket) with hot glue. 

 Using Elmer's glue and colored tissue paper, draw a bead of glue along the side of each opening and press tissue paper in place. Allow it to dry, then trim off excess.

Here is the completed project! 

 

 VIDEO

Good Luck!! 

For AG mini dolls or 11" dolls like Barbie or Monster High you can buy a package of 3 Rainbow Paper Lanterns 9.5" dia. at Party City $7

Attach it to a square kleenex box or other small box with the wire that's included inside the package then hang from your ceiling. How Fun!!

I hope you will try one of these ideas!